DERANCOURT Works kits

TOOL, PPE, CPE Kits

Return to list

Reference : KIT RESEAU BT

Tool / PPE / CPE kit for overhead/buried network fitter

You can change the kit according to your needs.

Weight : -

Télécharger en PDF

Composition

Photo Ref ENEDIS Nomenclature Quantity Description
D52 180 07.83.274 1 Insulated diagonal cutters for hard wire
D18 220 07.83.907 1 Insulated cable cutters
D20 160 07.83.350 1 Insulated stripping pliers
D5 07.83.266 1 Insulated double slip-joint adjustable pliers
PBT 12 16 A 07.83.665 1 Insulated Type A stripping pliers with circular cut 1,2 mm and longitudinal cut 1,6 mm
PBT 20 20 B 07.83.672 1 Insulated Type B stripping pliers with circular cut 2,0 mm and longitudinal cut 2,0 mm
D72 - 1 Insulated hacksaw frame
D19 250 07.83.054 1 Insulated adjustable wrench
CT 07.64.080 1 Insulated triangle socket wrench, spin type
MA200C - 1 Leather tool case
PSD 100 37.13.064 4 Synthetic fixing clamp
PSD 160 37.13.063 4
catalogue_r2077-2014-1_542409801f018_.jpg R2077 - 1 LV voltage absence tester and phase rotation up to 690V
DCFIS 07.83.224 1 Hybrid cutting pliers for steel strip
CCD8-60-3/8-P8C - 1 Case 8-60 Nm ratchet torque wrenches, square 3/8" (9,53 mm) Model P8C
SEP1 - 1 PPE storage bag
VEGA - 1 VEGA Electrician helmet with face shield Fitted with folding anti-flash textile to protect the ears
DH1 - 1 Hybrid combination pliers with removable tips
DH22D - 1 Hybrid long nose pliers with removable tips
MAT C0 1X06 - 1 Class 0 insulating mat
CC4A7 37.13.124 5 Cross head insulating cable end caps
CC5A11 37.13.125 5
NIA 90X50 05 37.13.283 2 Insulating sheets with adhesive strips
Choose - 1

Class : 0
Withstand voltage :  ≤ 1000 V
Special properties : R - C

Insulating gloves made of specially treated latex to obtain high dielectric characteristics.
Complies with standards : EN CEI 60903CE marking.
Material : natural latex.

Categories
A = Acid
C = Very low temperature T°
H = Oil
R = A+H+Z
Z = Ozone

Choose - 1

American model with cuffs.
Silicone-coated waterproof leather over-gloves with five fingers
American cup with webbed thumb. 100 mm thick leather cuff for protection of the forearm.
Velcro on back.

Use:
Small and medium handling, to be used as over-gloves for insulating gloves.
These gloves are designed to provide protection against mechanical hazards.

Performance level:
Abrasion 3
Cutting 1
Tearing 2
Perforation 2

Complies with standards :
NF EN 420.
General requirements for gloves.
NF EN 388.
Protective glove against mechanical hazards.
CE
marking

Size of over-glove to be selected based on the class and size of the insulating gloves (see table)

In the same category