DERANCOURT Works kits

TOOL, PPE, CPE Kits

Return to list

Reference : KIT TST BT

Tool / PPE / CPE kit for LV live working

You can change the kit according to your needs

Weight : -

Composition

Photo Ref ENEDIS Nomenclature Quantity Description
D20 160I - 1 Insulated coated head stripping pliers
D52-160I - 1 Insulated coated head diagonal cutters for hard wire
catalogue_dis18-1_53c7cb8b54850_.jpg DIS18 07.83.230 1 Hybrid cable cutters
catalogue_d22d-is_53c7cb18cbf2f_.jpg DIS22D 07.83.226 1 Hybrid long straight-nose pliers
KTF361 07.83.719 1 Insulated frontal ratchet cable cutters for copper/aluminum up to Ø 36 mm
CT 07.64.080 1 Insulated triangle socket wrench, spin type
ECART-PHAS - 1 Double wedge
LEVIER - ISO - 1 Insulating lever
MA200 - A - 1 Leather tool case
R4095CEI-03-12 - 1 Insulating sheet
R4096CEI-05-09 - 2 Insulating sheets with adhesive strips
R6016 - 1 Banner sign - "Installation sous tension-Danger de mort "
R6010 1 - 1 Red/white hazard warning tape
SAC GANT - 1 Storage bag for insulating gloves
C25 - 5 Cross head insulating cable end caps
C30 - 5
PSD 100 37.13.064 4 Synthetic fixing clamp
PSD 160 37.13.063 4
COIN-KTF - 1 Insulating guiding wedge
R4197 C0 06X1 - 1 Class 0 insulating mat
catalogue_r2077-2014-1_542409801f018_.jpg R2077 - 1 LV voltage absence tester and phase rotation up to 690V
DA30 IS 07.83.368 1 Hybrid fuse extracting pliers
DCFIS 07.83.224 1 Hybrid cutting pliers for steel strip
CCD8-60-3/8-P8C - 1 Case 8-60 Nm ratchet torque wrenches, square 3/8" (9,53 mm) Model P8C
SEP1 - 1 PPE storage bag
VEGA - 1 VEGA Electrician helmet with face shield Fitted with folding anti-flash textile to protect the ears
TB 4X100 IS 07.80.058 1 Insulated screwdriver for slot head screws
TB 6.5X150 IS 07.80.120 1
CRU 4X75 IS 07.80.258 1 Insulated Phillips cross-head screwdriver
CRU 6X125 IS 07.80.271 1
PBT IS 12 16 A - 1 Hybrid Type A stripping pliers with circular cut 1,2 mm and longitudinal cut 1,6 mm
PBT IS 20 20 B - 1 Hybrid Type B stripping pliers with circular cut 2,0 mm and longitudinal cut 2,0 mm
Choose - 1

Class : 0
Withstand voltage :  ≤ 1000 V
Special properties : R - C

Insulating gloves made of specially treated latex to obtain high dielectric characteristics.
Complies with standards : EN CEI 60903CE marking.
Material : natural latex.

Categories
A = Acid
C = Very low temperature T°
H = Oil
R = A+H+Z
Z = Ozone

Choose - 1

American model with cuffs.
Silicone-coated waterproof leather over-gloves with five fingers
American cup with webbed thumb. 100 mm thick leather cuff for protection of the forearm.
Velcro on back.

Use:
Small and medium handling, to be used as over-gloves for insulating gloves.
These gloves are designed to provide protection against mechanical hazards.

Performance level:
Abrasion 3
Cutting 1
Tearing 2
Perforation 2

Complies with standards :
NF EN 420.
General requirements for gloves.
NF EN 388.
Protective glove against mechanical hazards.
CE
marking

Size of over-glove to be selected based on the class and size of the insulating gloves (see table)

In the same category