My quotation (0 Products)

DERANCOURT Works kits

TOOL, PPE, CPE Kits

Return to list

Reference : KIT LINKY A1

Tool / PPE / CPE kit for LINKY meter fitters

You can change the kit according to your needs

Additional equipment :
- Low safety shoes (Ref.: R1507ES) or boots (Ref.: R1508ES)
- Overalls (Ref.: R1518GA) ) or jacket (Ref.: R1524GA) ) and trousers (Ref.: R1523GA)

Weight : -

Composition

Photo Ref ENEDIS Nomenclature Quantity Description
catalogue_d1-is-1_53c7ca5cedcc9_.jpg DIS1 07.83.220 1 Hybrid combination pliers
catalogue_dis18-1_53c7cb8b54850_.jpg DIS18 07.83.230 1 Hybrid cable cutters
catalogue_d22d-is_53c7cb18cbf2f_.jpg DIS22D 07.83.226 1 Hybrid long straight-nose pliers
CL 07.83.607 1 Insulated curved short-blade knife
TB 6.5x40 - 1 Insulated short of the blade screwdriver
CMD 4x40 - 1
R4002 69.41.284 1 Cartridge handle
catalogue_c11-2014_541c22d047268_.jpg DISQUE C11P - 2 Prohibition signs for electrical hazards - "Appareil condamné-Défense de manouvrer "
C25 - 1 Cross head insulating cable end caps
TTD4 07.80.040 1 Insulated torque limiter screwdriver for precision tightening of power terminals on disjonctors and smart meters, from 4.5 to 5 Nm (4.72 ± 6%).
R4197 C0 06X1 - 1 Class 0 insulating mat
DA30 IS 07.83.368 1 Hybrid fuse extracting pliers
CMD4X130 - 1 1 insulated Allen screwdriver 4mm - 130mm long
KIT PITONS - 1 Set of board support pins
MS9172ERDF - 1 1 voltage absence tester with phase rotation and IP2X test probes
CMP4-CNHT - 1 1 folding multiple spanner - 4 elements
SDPL2 - 1 Electrician backpack
VEGA - 1 VEGA Electrician helmet with face shield Fitted with folding anti-flash textile to protect the ears
LF6636 - 1 LED headlamp
TB 3.5X100 IS 07.80.056 1 Insulated screwdriver for slot head screws
TB 6.5X150 IS 07.80.120 1
TB 8X150 IS 07.80.122 1
POZI 4X75 IS 07.80.508 1 Insulated Pozidriv cross-head screwdriver
POZI 6X125 IS 07.80.521 1
POZI 8X150 IS 07.80.530 1
POZI 10X200 IS - 1
Choose - 1

Class : 00
Withstand voltage :  ≤ 500 V
Special properties : A - Z - C

Insulating gloves made of specially treated latex to obtain high dielectric characteristics.
Complies with standards : EN CEI 60903, CE marking.
Material : natural latex.

Categories
A = Acid
C = Very low temperature T°
H = Oil
R = A+H+Z
Z = Ozone
Choose - 1

100% polyester fabric with 100% PU coating FR/± 250g/m2.
Stitched fire retardant seams.
V neck.
Velcro closure.
(T) = Size (S, M, L, XL, XXL, XXXL)

Complies with standards :
EN ISO 14116
EN ISO 20471-class 2
EN ISO 1149-5
Choose - 1

American model with cuffs.
Silicone-coated waterproof leather over-gloves with five fingers
American cup with webbed thumb. 100 mm thick leather cuff for protection of the forearm.
Velcro on back.

Use:
Small and medium handling, to be used as over-gloves for insulating gloves.
These gloves are designed to provide protection against mechanical hazards.

Performance level:
Abrasion 3
Cutting 1
Tearing 2
Perforation 2

Complies with standards :
NF EN 420. General requirements for gloves.
NF EN 388. Protective glove against mechanical hazards.
CE marking

Size of over-glove to be selected based on the class and size of the insulating gloves (see table)
Choose - 1

Knitted in Spectra®/Lycra®, cut resistance: level 5 - EN 388 -
Polyurethane black coating on the palm.
Class 5 dexterity.

Performance level :
Abrasion : 4
Cutting : 5
Tearing : 4
Perforation : 3

Complies with standards :
NF EN 420. General requirements for gloves.
NF EN 388. Protective glove against mechanical hazards.
CE marking

In the same category