My quotation (0 Products)

DERANCOURT Works kits

TOOL, PPE, CPE Kits

Return to list

Reference : KIT 18510 BR

Tool / PPE / CPE kit for BR accreditation according to NFC 18510

You can change the kit according to your needs

Weight : -

Composition

Photo Ref ENEDIS Nomenclature Quantity Description
D20 160 07.83.350 1 Insulated stripping pliers
catalogue_dis18-1_53c7cb8b54850_.jpg DIS18 07.83.230 1 Hybrid cable cutters
catalogue_d22d-is_53c7cb18cbf2f_.jpg DIS22D 07.83.226 1 Hybrid long straight-nose pliers
CT 07.64.080 1 Insulated triangle socket wrench, spin type
MA200 - A - 1 Leather tool case
R4096CEI-05-09 - 1 Insulating sheets with adhesive strips
catalogue_c11-2014_541c22d047268_.jpg DISQUE C11P - 2 Prohibition signs for electrical hazards - "Appareil condamné-Défense de manouvrer "
R6005 - 1 Working area boundary - "Limite de zone de travail-Ne pas franchir"
SAC GANT - 1 Storage bag for insulating gloves
C25 - 5 Cross head insulating cable end caps
C35 - 5
PSD 100 37.13.064 4 Synthetic fixing clamp
PSD 160 37.13.063 4
R4197 C0 06X1 - 1 Class 0 insulating mat
catalogue_r2077-2014-1_542409801f018_.jpg R2077 - 1 LV voltage absence tester and phase rotation up to 690V
EFPF - B - 1 Electrician face shield with forehead protection
CC200I-2A (VM) - 1 Ratchet spanner case 3/8" (9,53 mm) model 2A
SEP1 - 1 PPE storage bag
CADP-38P-RO - 2 Lockout padlocks made from insulating material
MCDL A - 1 Lockout for circuit breakers with toggle switches
MCDL B - 1
TB 4X100 IS 07.80.058 1 Insulated screwdriver for slot head screws
TB 6.5X150 IS 07.80.120 1
CRU 4X75 IS 07.80.258 1 Insulated Phillips cross-head screwdriver
CRU 6X125 IS 07.80.271 1
Choose - 1

Class : 0
Withstand voltage :  ≤ 1000 V
Special properties : R - C

Insulating gloves made of specially treated latex to obtain high dielectric characteristics.
Complies with standards : EN CEI 60903, CE marking.
Material : natural latex.

Categories
A = Acid
C = Very low temperature T°
H = Oil
R = A+H+Z
Z = Ozone
Choose - 1

American model with cuffs.
Silicone-coated waterproof leather over-gloves with five fingers
American cup with webbed thumb. 100 mm thick leather cuff for protection of the forearm.
Velcro on back.

Use:
Small and medium handling, to be used as over-gloves for insulating gloves.
These gloves are designed to provide protection against mechanical hazards.

Performance level:
Abrasion 3
Cutting 1
Tearing 2
Perforation 2

Complies with standards :
NF EN 420. General requirements for gloves.
NF EN 388. Protective glove against mechanical hazards.
CE marking

Size of over-glove to be selected based on the class and size of the insulating gloves (see table)

In the same category