PolesReturn to list
Reference : PT 4032 L(xx)H
Telescopic insulating poles with reinforced tube and hexagonal tip
Telescopic poles for live work, with adaptable tools for:
• Remote mechanical work.
• Perform checks with adaptive diagnostic devices (TAV).
• Install portable grounding and short circuit equipment.
They are intended for dry use but can be used under very wet conditions (hydrophobic surfaces).
Epoxy tubes loaded with fiberglass.
Equipped telescopic poles:
• with an upper section of ø 32 mm, orange in color and filled with foam. Complies with standard IEC 60855-1
• with a lower section of ø 40 mm, yellow and hollow. Complies with standard IEC 61235.
They are available with a 12 mm locking female hex bit
Length: 2m (folded 1225 mm) or 1m50 (folded 875 mm)
Work Position Locking Device (Deployed)
Hand guard and anti-shock tip in elastomeric material
The telescopic poles can have an NFC TAG (13.56 MHz, 144 Bytes) for identification and traceability
Complies with standard IEC EN 62193 Ed 2003: Live working - Telescopic sticks and telescopic measuring sticks
Complies with standard IEC EN 60855-1 Ed 2009: Live working - Insulating foam-filled tubes and solid rods - Part 1: Tubes and rods of a circular cross-section
Complies with standard IEC EN 61235 Ed 1993: Live working - Insulating hollow tubes for electrical purposes
|PT 4032 L20H T||hexagonal tip||with TAG NFC||Length: 2m (folded 1225 mm)||37.10.017||1.635 Kg|
|PT 4032 L20H||hexagonal tip||without TAG NFC||Length: 2m (folded 1225 mm)||-||1.635 Kg|
|PT 4032 L15H T||hexagonal tip||with TAG NFC||Length: 1m50 (folded 875 mm)||-||1.34 Kg|
|PT 4032 L15H||hexagonal tip||without TAG NFC||Length: 1m50 (folded 875 mm)||-||1.34 Kg|