Insulated tools 1000V NF EN CEI 60900Return to list
Reference : CD8 60RVM 3/8
Reversible 3/8 ‘’ insulated torque wrench and mechanically locked
For precision tightening.
Automatic release torque wrenches, graduated adjustment, type II Class A, accuracy 4%, compliant with standard EN ISO 6789.
The torque, expressed in Nm ( Lb/ft ), is adjusted by turning the rear handle.
The relevant graduation should be aligned with the vertical mark on dial.
A locking system prevents any loss of adjustment.
Insulated torque wrench 1000 V
Equipped with a mechanical locking device - resistance> 50 kg.
Type tripped, adjustable type II, class A
± 6% on values below 10 Nm
± 4% on values greater than 10 Nm
Insulation bilayer red + orange
Torque adjustment with lockable rear button in position
(shoot - adjust - push)
Torque tightening screw not right and left by reversing the square coach.
The torque wrench works likes a ratchet spanner and when the torque is reached the handle is released by around 7°, accompanied by a mechanical sound signal.
The wrench automatically resets and is ready again for tightening.
It is not advisable to use a torque wrench for loosening.
A reversible ratchet model or reversible drive square is available for tightening left or right-hand threads.
The torque wrench is identified by a serial number and comes with its calibration certificate.
We carry out periodic calibration of the torque wrenches (advisable every year for normal use).
The torque wrench may be supplied in an individual box or along with the accessories of your choice (sockets, extensions bar, T spanners)
When not in use, keep the wrench adjusted to the minimum torque level.
Characteristics : Torque range: 8 to 60 Nm
Designation : Square drive: 3/8"
Dimension : 358 mm
Weight : 0.9 Kg