Return to list

Reference : CD5

Square drive T torque wrench 1/4’’ (6.35 mm) adjustable from 1.5 to 5 Nm

Tightening to a torque of 1.5 to 5 Nm for all male or female sockets with 1/4" square drive.
Adjustable release type II, class A (ISO 6789).

Accuracy: ± 6%
Reinforced thermoplastic insulation and polycarbonate window.
Torque adjustment via T-handle, lockable in position (pull-adjust-push).
When tightening, when the torque is reached, the key tightens over a range
of approximately 7°, accompanied by a mechanical audible signal.

Wrench is reset automatically and is ready for re-tightening
Delivered with calibration certificate, serial number marking and calibration date.
For regular normal use, have the wrench calibrated at least once a year,
contact our aftersales service.

Possibility of providing this device equipped with an NFC TAG:
Radio frequency standard ISO 14443-A (13.56 MHz) NFC FORUM type 2 – 144 Bytes mini.
The presence of the TAG enables the identification and traceability of regular calibrations
(add T to the reference if desired with TAG)

Accessories (optional):
Wrench box and accessories storage ref. COFFRETP6 2
1/4’’ insulated female hex sockets ref. D150 6P (4 to 14), see page 46 (choice of composition)
1/4’’ insulated long female hex sockets ref. DL150 6P (4 to 14), see page 47 (choice of composition)
Male hex sockets ref. M150 (3 to 10), see page 48 (choice of composition)
1/4’’ (6.35 mm) single-lock insulated extension ref. R150 (L) see page 49
(Length 50, 100 or 150 as desired


Ref Characteristics Weight  
CD5 Without TAG NFC 0.415 Kg
CD5 T With TAG NFC 0.415 Kg
Télécharger en PDF

In the same category